Lumber

Board foot calculator

A board foot is 144 cubic inches of wood, like a board 1 inch thick, 12 inches wide and 1 foot long. Type each line of your lumber list and the calculator adds up the board feet, the linear feet and the cost.

Thickness and width are in inches: type 2, 1 1/2, 1.5 or a hardwood size like 8/4. Length is in feet, so 8 means 8 feet, and 8' 6", 102 in or 2400 mm work too. Leave the price empty if you only want the volume. Your list stays in this browser for next time.

The board foot formula

Board feet = thickness in inches × width in inches × length in feet ÷ 12

That's the same as multiplying all three sizes in inches and dividing by 144, the number of cubic inches in a board foot. Take the first line of the example: a 2×6 that's 8 feet long is 2 × 6 × 8 ÷ 12 = 8 board feet. Ten of them make 80.

A handy shortcut falls out of it. A 2×6 has exactly 1 board foot in every foot of length, a 1×12 too, so for those sizes linear feet and board feet are the same number. A 2×12 has 2 per foot and a 1×6 has a half.

Board foot chart for common sizes

These are nominal sizes, the way lumber is named and usually priced, at the stock lengths you'll find at most yards in the US.

Board feet in one piece, by nominal size and length
Size8 ft10 ft12 ft14 ft16 ftPer foot
1×42.673.3344.675.330.33
1×6456780.5
1×85.336.6789.3310.670.67
1×106.678.331011.6713.330.83
1×128101214161
2×45.336.6789.3310.670.67
2×68101214161
2×810.6713.331618.6721.331.33
2×1013.3316.672023.3326.671.67
2×1216202428322
4×410.6713.331618.6721.331.33
6×624303642483

A 2×4 that's 8 feet long comes to 5.33 board feet, two thirds of its length, since a 2×4 has 2/3 of a board foot in every foot.

Nominal or actual size?

A 2×4 doesn't measure 2 by 4. Dried and planed softwood lumber in the US is 1 1/2″ by 3 1/2″. Lumber yards still count board feet from the nominal size, so a 2×4 at 8 feet is billed as 5.33 board feet, even though the wood in it is only 3.5.

So type the nominal size when you're checking a quote or a price. Type the actual size if you need the real volume of wood, say for weight or for comparing two suppliers who plane to different sizes.

Hardwood thickness: 4/4, 5/4, 8/4

Hardwood dealers name thickness in quarters of an inch. 4/4, said "four quarter", is 1 inch rough, 5/4 is 1 1/4″, 6/4 is 1 1/2″ and 8/4 is 2″. You can type those straight into the thickness box, so 8/4 counts as 2 inches.

Hardwood is sold at random widths and lengths, which is why it's priced by the board foot and not by the piece. You pay for the rough size, before planing. A 4/4 board planed on both faces usually ends up around 13/16″ thick, so plan your project with the finished size and buy with the rough one.

In the example, 3 boards of 8/4 walnut or oak at 6″ wide and 10 feet long are 10 board feet each. At $9.50 a board foot that line costs $285.00.

Price per board foot, per linear foot or per piece

Lumber gets priced three ways, and each line in the calculator can use a different one. Pick per piece for studs and boards sold at a shelf price, per linear foot for trim and some decking, and per board foot for hardwood and rough lumber. When a line isn't priced per board foot, the calculator also shows what it works out to per board foot, so you can compare a $7.98 2×6 with a $1.10 board foot price.

The prices in the example are only there to show how it works. They aren't today's prices anywhere.

Board feet in metric

One board foot is exactly 2,359.737216 cubic centimeters, because an inch is exactly 25.4 mm. A cubic meter holds about 423.78 board feet. The calculator shows the total in cubic meters too, and you can type sizes in millimeters, like 38 mm by 140 mm by 2400 mm.

Before you order

  • Add extra for waste. Rough hardwood loses wood to knots, cracked ends and your own cuts, so order more than your finished parts add up to. Framing lumber wastes less.
  • Round lengths up to what the yard stocks. A 7 foot piece still comes off an 8 foot board, and you pay for the 8.
  • Check if the price is per board foot or per thousand board feet. Some yards quote by the thousand, written MBF, so $1,100 per MBF is $1.10 a board foot.

Questions

How many board feet are in a 2×4×8?

5.33 board feet: 2 × 4 × 8 ÷ 12. That uses the nominal size, which is how yards count it.

How do I convert linear feet to board feet?

Multiply the linear feet by the thickness and the width in inches, then divide by 12. For 100 linear feet of 1×6 that's 100 × 1 × 6 ÷ 12 = 50 board feet. The Per foot column in the chart has the factor for each size.

What is a board foot in cubic feet?

A twelfth of a cubic foot. So 12 board feet make 1 cubic foot of wood.

Does the calculator save my list?

Yes, in this browser only. Nothing is sent anywhere. Back to the example clears it and puts the sample lines back.

Is there an app for this?

Yes. My Construction Calculator for Android has a board feet tool in its Pro version, next to concrete, stairs and rafters, and it saves each job so you can come back to the list.

Construction Calculator
Feet, inches and fractions with exact math. Pro adds board feet, concrete, stairs and rafters.

Get it on Google Play
All tools
Measuring

Feet and inches calculator

Add, subtract, multiply and divide lengths like 5' 7 3/8", with the answer in feet, inches, decimals and mm.

Calculator
Measuring

Inch fraction chart and converter

Decimal inches or millimeters to the nearest tape mark, with the rounding error shown, plus a printable chart of every 64th.

Converter
Stairs

Stair stringer calculator

Risers, treads, run, stringer and angle for a straight stair from three numbers, with a side view drawn to scale.

Calculator